Headsets Australia
Ready to buy? Visit
Please Note: The model number of your Cisco telephone can usually be found on a label stuck on the bottom of the phone.
This phone does NOT have a headset port
Any Poly headset and an M22 amplifier
Any Jabra headset and a Jabra Link 860
Any EPOS headset and a UI 710 switchbox or UI 770 amplifier
A handset lifter is required for remote answering
Any Poly wireless headset with a HL10 lifter
Switch A
Any Jabra wireless headset with a GN1000 lifter
Switch A
Any EPOS wireless headset with a HSL10
Switch A
These phones have a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable
An Electronic Hook Switch cable (EHS) is required for remote answering
Yealink WH64 headset, with an EHS62 cable
Yealink WH62 or WH63 headset, with an EHS60 cable
Any Poly wireless headset and optional APC-43 EHS cable
Any Jabra wireless headset and optional 14201-43 EHS cable
Any EPOS wireless headset, with optional CEHS-CI 01 EHS cable
This phone has a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable
An Electronic Hook Switch cable (EHS) is required for remote answering
Yealink WH64 headset, with an EHS62 cable
Yealink WH62 or WH63 headset, with an EHS60 cable
Any Poly wireless headset and optional APC-43 EHS cable
Any Jabra wireless headset and optional 14201-43 EHS cable
Any EPOS wireless headset, with optional CEHS-CI 01 EHS cable
This phone has a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable.
An Electronic Hook Switch cable (EHS) is required for remote answering
Yealink WH64 headset, with an EHS62 cable
Yealink WH62 or WH63 headset, with an EHS60 cable
Any Poly wireless headset and optional APC-43 EHS cable
Any Jabra wireless headset and optional 14201-43 EHS cable
Any EPOS wireless headset, with optional CEHS-CI 01 EHS cable
This phone has a built in Bluetooth support
Any Yealink Bluetooth headset
Any Poly Bluetooth headset
Any Jabra Bluetooth headset
Any EPOS Bluetooth headset
These phones have a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable.
An Electronic Hook Switch cable (EHS) is required for remote answering
Yealink WH64 headset, with an EHS62 cable
Yealink WH62 or WH63 headset, with an EHS60 cable
Any Poly wireless headset and optional APC-43 EHS cable
Any Jabra wireless headset and optional 14201-43 EHS cable
Any EPOS wireless headset, with optional CEHS-CI 02 EHS cable
These phones have a built in USB port for Headsets
*Yealink:
Any Yealink UH3 Series Corded or WH6 Series Wireless headset
Any Poly USB headset
Any Jabra USB headset
Any EPOS USB headset
These phones have a built in Bluetooth support
Any Yealink Bluetooth headset
Any Poly Bluetooth headset
Any Jabra Bluetooth headset
Any EPOS Bluetooth headset
These phones have a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable
A handset lifter is required for remote answering
Any Poly wireless headset with a HL10 lifter
Switch A
Any Jabra wireless headset with a GN1000 lifter
Switch A
Any EPOS wireless headset with a HSL10
Switch A
These phones have a dedicated headset port
Any Poly headset and a Vista cable (U10)
Any Jabra headset and a Jabra GN1200 CC cable (Switch Setting: 2), or Cisco QD cable (8800-01-37)
Any EPOS headset and a CSTD 08 cable
An Electronic Hook Switch cable (EHS) is required for remote answering
Any Poly wireless headset with a HL10 lifter
Switch A
Any Jabra wireless headset with a GN1000 lifter
Switch A
Any EPOS wireless headset with a HSL10
Switch A
To fit a headset to these phones, unplug the handset and replace it with the appropriate headset and direct connect cord. If you need to switch between headset and handset an optional switchbox can be used - in this case both the headset and handset cords plug into the switchbox
Any HW series headset and a reversed Polaris cord. An alternative is any HW series headset and a M22 amplifier.
Switch position 1, Receive 3, reversed telephone cord wiring
Any direct connect headset and a reversed direct connect cord (part no: 8800-01-06). An alternative is any headset and a GN 8000 amplifier or GN 8210 digital amplifier
Any EPOS headset and a UI 710 switchbox or UI 770 amplifier
This telephone has a 2.5mm dedicated headset jack
Any HW series headset with a Quick Disconnect to 2.5mm cable
Any headset top and a 2.5mm CCEL 192 cable
To fit a headset to these phones, you can: unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier. or connect via a dedicated headset port
Any HW series headset with a Vista cable. Please note that the H81-CIS, H91-CIS or H101-CIS (direct connect) headsets are no longer available in Australia
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Switch position B. Plug into headset port. These phones are not suitable for EHS
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantonics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
To fit a headset to these phones, you can: unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier or connect via a dedicated headset port
Any HW series headset with a Vista cable. Please note that the H81-CIS, H91-CIS or H101-CIS (direct connect) headsets are no longer available in Australia
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Switch position B. Plug into headset port. If EHS is needed use Jabra Link 14201-16 cable
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantonics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
These phones have a dedicated headset port
Any HW series headset with a Vista cable
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantronics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
These phones have a dedicated headset port
Any HW series headset with a Vista cable
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantronics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
These phones have a dedicated headset port and Bluetooth headset compatibility
Any HW series headset with a Vista cable
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter or the APU-72 Electronic Handset Lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantronics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
These phones have a dedicated headset port and Bluetooth headset compatibility
Any HW series headset with a Vista cable
Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Poly HL10 handset lifter or the APU-72 Electronic Handset Lifter
Any headset with a "B" cord (part no: 8800-01-37) or 8800-02 cord (has yellow sleeve near the RJ connector) - these direct connect via the headset port
Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantronics Vista cord wiring
Any headset top and a CSTD 08 cable- these direct connect via the headset port
These phones have a dedicated 2.5mm headset port. Non-mainstream headsets will require an RJ to 2.5mm adaptor cable
Any HW series headset with a Quick Disconnect to 2.5mm Vista bottom cable
Any headset top and a standard cable with a 2.5mm plug
Any headset top and a CCEL 191-2 cable
Any Poly USB headset
Any Poly USB headset
A CS60-USB Wireless headset