The Headset Place

Ready to buy? Visit

Have Questions?
Call Our Helpline

1800 666 234

Aastra/Ericsson PABX

Ericsson Telephone

Please Note: The model number of your Ericsson PABX switchboard or telephone can usually be found on a label stuck on the bottom of your device.

MD110 PABX

Consoles/Switchboards

All Ericsson PABX switchboards can be fitted with headsets. Use of headsets is critical for the efficient performance of your switchboard operator(s).

Dialog 2500

To fit a headset to this Ericsson PABX switchboard, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an E10 in-line amplifier or M22 amplifier (switch position 1). An alternative is a P series headset and Polaris cord.

Plantronics CS60, CS70N & SupraPlusWireless:
Switch position 1, standard telephone cord wiring.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Dialog 2600

To fit a headset to this Ericsson PABX switchboard, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier (switch position 5). An alternative is a P series headset and Polaris cord.

Plantronics CS60, CS70N & SupraPlusWireless:
Switch position 1, Receive 3, standard telephone cord wiring.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Telephones

300 Series, 3200(D3), OPI3000 & Symbolic

To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier. An alternative is a P series headset and Polaris cord.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

ASB30, ASB100, ASB900 & BCS90 PABX

Consoles/Switchboards

These Ericsson PABX switchboards can all be fitted with headsets. Use of headsets is critical for the efficient performance of your switchboard operator(s).

To fit a headset to your Ericsson PABX switchboard, unplug the handset and replace it with the appropriate amplifier. The amplifier connection is via a special plug known as a Lemo plug. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier, (Setting 1, Transmit Level 2).

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Telephones

These Ericsson PABX's do not have any proprietary telephones that are compatible with headsets. See the note above regarding non-proprietary telephones.

BCS 150 & BCS250 PABX

Consoles/Switchboards

These Ericsson PABX switchboards can be fitted with headsets. Use of headsets is critical for the efficient performance of your switchboard operator(s).

Console 2754

To fit a headset to this switchboard, unplug the handset and replace it with the appropriate amplifier. The amplifier connection is via a special plug known as a Lemo plug. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Telephones

2751, 2752, 2753, & 2755

To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier. Your PABX service technician can program your PABX so that your telephone has a headset button - saving you lifting your handset to answer calls.

Plantronics corded:
Any H or HW series headset and an M22 amplifier.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Ericsson telephone

BP250 & MD express PABX

Consoles/Switchboards

These Ericsson PABX switchboards can be fitted with headsets. Use of headsets is critical for the efficient performance of your switchboard operator(s).

Console 2663

To fit a headset to this switchboard, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier, (Setting 5, Transmit Level 2).

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Telephones

DBC199, DBC202 (Dialog 3202) & DBC203 (Dialog 3203)

To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier. Please Note: Sennheiser does not need an amplifier

Plantronics corded:
Any H or HW series headset and an M22 amplifier, (Setting 5, Transmit Level 2).

Plantronics CS60, CS70 & SupraPlusWireless:
Switch position 1, Transmit B, Receive 4, standard telephone cord wiring.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

Sennheiser corded:
Any headset and a CSTD01 cable.

ADD-COM corded:
Any headset and a Voyager amplifier.

BP24 & BP40 PABX

Consoles/Switchboards

All PABX switchboards can be fitted with headsets. Use of headsets is critical for the efficient performance of your switchboard operator(s).

Console

To fit a headset to this switchboard, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H or HW series headset and an M22 amplifier.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Telephones

System Phones

To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:
Any H series headset and an M22 amplifier.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

ADD-COM corded:
Any headset and a Voyager amplifier.

Tempo 28i & 96i PABX

Telephones

Exec 22, Exec 34 & Standard

These telephones are also known as Nitsuku DX2AE-12BTXH, DX2AE-22BTXH, DX2AE-24BTUXH or DX2AE-34BTUXH. To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier or amplified cable. If using an amplifier, the handset cord then plugs into it.

Plantronics corded:
Any H or HW series headset and an M22 amplifier. An A10-11 cable amplifier will also work well.

GN Netcom corded:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

Sennheiser corded:
Any headset and a CXHS 01 cable.

ADD-COM corded:
Any headset and a Voyager amplifier.