 |
| |
Polycom Phones
Please Note: The model number of your Polycom telephone can usually be found on a label stuck on the bottom of the phone.
SoundPoint IP 300, 301, 400, 430, 450, 500, 501, 550, 560, 600, & 650
These headsets have a dedicated modular headset jack. To fit a headset to these phones simply plug a headset and cord into this jack.
- Plantronics corded:
- Any H series headset and a Polaris cable.
- GN Netcom / Jabra corded:
- Any "direct-connect" headset and a standard (ie 8800-01-01) cable.
- Sennheiser corded:
- Any headset and a CSTD 01 cable.
- ADD-COM corded:
- Any headset and a "Blue" cord.
SoundPoint IP 320 & 330
These telephones have a dedicated 2.5mm headset jack. If you choose to use the handset jack, please remember that it is "polarity sensitive" - the cord must be reversed.
- Plantronics corded:
- Any H series headset and a Quick Disconnect to 2.5mm bottom cord (if using headset jack). Any H series headset and a reversed Polaris cord - a reversed A10 cable may be required, if the transmission level is too soft. (if using handset jack).
- GN Netcom / Jabra corded:
- Any headset and a standard cord with a 2.5mm plug (if using headset jack) or any headset and a reversed Direct Connect cord (if using handset jack).
- ADD-COM corded:
- Any headset and a Quick Disconnect to 2.5mm bottom cord (if using headset jack) or any headset and a BLUE cord (if using handset jack).
- Claria corded:
- Any headset with a 2.5mm bottom cord (if using headset jack) or any headset and a QDB-R cord (if using handset jack).
- Polaris corded:
- Any headset with a standard (ie SP5021) bottom cord and 2.5mm adaptor (if using headset jack) or any headset and a reversed standard (ie SP5021)cord (if using handset jack).
We recommend AAAHeadsets for your Polycom SoundPoint IP headsets.
|
|
