| |
Siemens PABX Phones
Please Note: The model number of your Siemens PABX telephone can usually be found on a label stuck on the bottom of the device.
Siemens PABX Hicom 100
Telephones
T8 & T16D
To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 9).
- GN Netcom:
- Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
- ADD-COM:
- Any headset and a Voyager amplifier.
T16
To fit a headset to these phones, unplug the handset and replace it with the appropriate headset.
- Plantronics:
- Any P series headset and a Polaris cable. An alternative is any H series headset and an M12 amplifier (Switch Setting 5, Transmit 9).
- GN Netcom:
- Any "direct-connect" headset and a standard cord.
- ADD-COM:
- Any headset and a BLUE cord.
 Siemens PABX Hicom 110, 120 & 130
Telephones
Ultraset Comfort, Ultraset Memory & Ultraset Standard
To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier. These phones can also be configured with a headset button - programmable by your telephone system technician.
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 9).
- GN Netcom:
- Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
- ADD-COM:
- Any headset and a Voyager amplifier.
Siemens PABX Hicom 118, 150 & 300
Telephones
Optiset - E Advance, E Advance Plus, E Basic, E Entry, E Memory & E Standard
To fit a headset to these phones use the dedicated headset socket - be aware that doing this will stop your handset from working. These phones can also be configured with a headset button - programmable by your telephone system technician.
- Plantronics:
- Any P series headset and a Polaris cable. An alternative is any H series headset and an M12 amplifier (Switch Setting 5, Transmit 2).
- GN Netcom:
- Any "direct-connect" headset and a standard cord.
- ADD-COM:
- Any headset and a BLUE cord.
PC based Optiset
To fit a headset to these phones use the Siemens Adaptor Set AC2.
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 2).
- GN Netcom:
- UNKNOWN.
- ADD-COM:
- UNKNOWN.
 Siemens PABX HiPath 500, 3000, 4000 & 5000
Telephones
OptiPoint - 500 Entry & 500 Economy
To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 2).
- GN Netcom:
- UNKNOWN.
- ADD-COM:
- UNKNOWN.
OptiPoint - 500 Basic, 500 Standard & 500 Advanced
To fit a headset to these phones, unplug the handset and replace it with the appropriate headset.
- Plantronics:
- Any P series headset and a Polaris cable. An alternative is any H series headset and an M12 amplifier (Switch Setting 5).
- GN Netcom:
- Any "direct-connect" headset and a standard cord.
- ADD-COM:
- Any headset and a BLUE cord.
OptiPoint - 600 Office
To fit a headset to these phones use the dedicated headset socket.
- Plantronics:
- Any P series headset and a Polaris cable. An alternative is any H series headset and an M12 amplifier (Switch Setting 5).
- GN Netcom:
- Any "direct-connect" headset and a standard cord.
- ADD-COM:
- Any headset and a BLUE cord.
Siemens PABX EMS
These are VERY old PABX's and the information below is for completeness.
Attendant Consoles
EMS 30 & 80 PABX
Headsets cannot be used with these consoles as the handset does not have an RJ jack (i.e. it is hardwired).
EMS 60, 150 & 12000 PABX
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 2). These consoles require an M plug.
EMS 601 PABX
- Plantronics:
- Any H series headset and an M12 amplifier (Switch Setting 5, Transmit 2). These consoles require a Slimline K plug.
We recommend AAAHeadsets for all your Siemens headsets needs
|
