Cisco Phones

Please Note: The model number of your Cisco telephone can usually be found on a label stuck on the bottom of the phone.

Cisco Unified IP Phones 7902, 7905 & 7905G

To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

Plantronics corded:: Any H series headset and a M12 amplifier (switch position 5.
Plantronics CS60, CS70 & SupraPlusWireless:: Switch position 1, Receive 3, standard telephone cord wiring.
GN Netcom corded:: Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
Sennheiser corded:: Any headset top and a CSTD 24 cable. Also recommended is the headset/handset switchbox (UI 710)
ADD-COM corded:: Any headset and a Voyager amplifier.

Cisco Unified IP Phones 7910G, 7911G & 7912G

To fit a headset to these phones, unplug the handset and replace it with the appropriate headset and direct connect cord. If you need to switch between headset and handset an optional switchbox can be used - in this case both the headset and handset cords plug into the switchbox.

Plantronics corded:: Any P series headset and a reversed Polaris cord. An alternative is any H series headset and a M12 amplifier.
Plantronics CS60, CS70 & SupraPlusWireless:: Switch position 1, Receive 3, reversed telephone cord wiring.
GN Netcom corded:: Any direct connect headset and a reversed direct connect cord. An alternative is any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
Sennheiser corded:: Any headset top and a reversed CSTD 01 cable. Also recommended is the headset/handset switchbox (UI 710)
ADD-COM corded:: Any headset and a Red cord.

Cisco Unified IP Phones 7940G, 7941G, 7960G & 7961G

To fit a headset to these phones, you can:

unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier. or
connect via a dedicated headset port.

Plantronics corded:: Any H series headset with a Vista cable. Please note that the H81-CIS, H91-CIS or H101-CIS (direct connect) headsets are no longer available in Australia.
Plantronics CS60, CS70 & SupraPlusWireless:: Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Plantronics HL10 handset lifter.
GN Netcom corded:: Any headset with a "B" cord (part no: 8800-01-37) - these direct connect via the headset port.
GN Wireless or Bluetooth:: Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantonics Vista cord wiring.
Sennheiser corded:: Any headset top and a CSTD 08 cable- these direct connect via the headset port.
ADD-COM corded:: Any headset top and a Red cord - these direct connect via the headset port.

Cisco Unified IP Phones 7970G & 7971G

These phones have a dedicated headset port.

Plantronics corded:: Any H series headset with a Vista cable.
Plantronics CS60, CS70 & SupraPlusWireless:: Switch position 4, Receive 3, standard telephone cord wiring. They are also compatible with the Plantronics HL10 handset lifter.
GN Netcom corded:: Any headset with a "B" cord (part no: 8800-01-37) - these direct connect via the headset port.
GN Wireless or Bluetooth:: Any headset however, the headset to telephone cord must be transposed (i.e. same as Plantonics Vista cord wiring.
Sennheiser corded:: Any headset top and a CSTD 08 cable- these direct connect via the headset port.

Cisco Cordless IP Phones 7920

These telephones have a 2.5mm dedicated headset jack.

Plantronics corded:: Any H series headset with a Quick Disconnect to 2.5mm cable.
Sennheiser corded:: Any headset top and a 2.5mm CCEL 192 cable.

IP Communicator

Plantronics corded:: Any H series headset and a DA Series Adaptor.
Plantronics CS60, CS70 & SupraPlusWireless:: A CS60-USB Wireless headset.

IP Softphone

Plantronics corded:: Any H series headset and a DA Series Adaptor.
Plantronics CS60, CS70 & SupraPlusWireless:: A CS60-USB Wireless headset, with a minimum Cisco Softphone version of 1.3.

Buy ALL Cisco Headsets Here!